BMY牛提前产犊试验

来源 :中国牛业科学 | 被引量 : 0次 | 上传用户:hanbing5
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
[目的]为提高母牛的利用年限、缩短后备母牛的培育时间、探索BMY青年牛的适配年龄(体重)和提前妊娠产犊对母畜和犊牛的影响。[方法]对断乳母犊进行适当培育,使其早进入初情期,运用繁殖生物技术妊娠产犊。[结果]经过培育后BMY青年牛的初情期平均为(270.8±20.8)d,此时的平均体重为(254±10.6)kg,发情周期为(20.5±2.0)d,发情持续时间为(19.7±2.4)h,适配年龄为(290~300)d(体重250~280kg),平均妊娠期为282d,犊牛的初生重平均为33.52kg、哺乳期日增重超过0.7kg,母畜产后发育良好。[结论]以上的研究结果说明对断乳犊牛进行培育后,1岁青年母牛具有与成年母牛相当的繁殖性能,能使80%以上的BMY青年母牛在2岁牛左右(20~24月龄)产第一胎;提前产犊对母、犊无不良影响,能取得较好的经济效益和充分发挥母牛的繁殖性能。“,”【Objective】The trial was conducted to enlarge the cow's utility duration,shorten the breeding period of heifer,explore the suitable mating age or body weight of heifers and the effect of early pregnant and calving on mother and calves.【Method】Biological breeding techniques and applicable nursing on BMY weaning female calves were used to achieve the forwardness of puberty,pregnancy and calving.【Result】The result showed that the puberty period of BMY heifer was 270.8±20.8 d and the puberty weight was 254±10.6 kg.The estrous cycle was 20.5±2.0 d and the duration estrus was 19.7±2.4 h.The suitable mating age was about 290~300 d(suitable mating weight was about 250~280kg).The average gestation was 282d and the average birth-weight of calves was 33.52kg.The daily gain of calves was over 0.7 kg during lactation,and the development of cows was well after calving.【Conclusion】It demonstrated that the reproductive performance of one-years-old heifer was the same with the adult after applicable nursing on BMY weaning female calves,and more than 80% of BMY heifer could produce the first calf at the age of 20~24 months.Early calving had no harmful effects on female and calves;which could achieve good economic benefit and give full play to reproductive performance of female.
其他文献
期刊
发动机及管路零件,要求精度高。零件上的毛刺是产品质量的严重隐患。采用电火花、电解、磨料流等加工方法,分别对发动机零件及管路零件进行试验研究。比较了各加工方法的优缺
2006年橡胶等原材料的价格犹如坐过山车,从年初的每吨一万七八千元左右到最高的近三万元再到现在的一万七八千元左右.由于其占轮胎成本的近70%,橡胶等原材料的涨跌直接牵动着
镁合金具有密度小的优势,随着其耐热、耐蚀性能的提高,将用来替代耐热铝合金、钛合金零件。特别是密度最小的Mg–Li合金,具有很高的强度、韧性和可塑性,是航空航天及重要运输工具
随着中国经济的不断发展,世界许多著名的大型企业纷纷选择到中国投资建厂.他们的到来为我们带来了先进的生产技术,解决了就业,增加了地方税收,也为我们带来了值得借鉴的先进
计划工作是全部管理职能中最基本的一个职能,为使组织中各种活动能够有节奏地进行,必须有严密、统一的计划。而对于安全生产工作,计划更不容忽视。这里先举两个发生在我身边
针对钛合金板料在常温下弹性大,成形困难的问题,提出了利用钛合金在高温下具有的超塑性对异形件进行超塑成形的工艺方法.对钛合金板料(Ti-6Al-4V)超塑成形进行了相关机理分析
期刊
某大型壳体门渗雨,是困扰我们厂生产的难题.采用新的设计方案后,在门框上折出排水槽,变原来的对雨水只“堵”不“排”的单一作用的结构为又“堵”又“排”、又能防止密封条被