3μm低阈值MgO:PPLN-OPO布拉格体光栅腔谱宽压窄研究

来源 :中国激光 | 被引量 : 0次 | 上传用户:tongjingjj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
设计了一种双程抽运可调谐光参量振荡器(OPO)。利用1.065μm单频脉冲光纤激光器抽运周期性畴极化掺镁铌酸锂晶体(MgO…PPLN),采用反射式布拉格体光栅压窄振荡信号光,将闲频光的谱宽从自由振荡时的38nm压窄到0.42nm,并将振荡阈值降低至6.7 W,从而获得了高转换效率的中红外激光输出。通过调节体光栅的角度和温度,实现了闲频光230GHz的调谐输出;当闲频光输出功率为2.5 W时,其水平方向和垂直方向的光束质量因子分别为1.8和1.9。 A two-way pump tunable optical parametric oscillator (OPO) is designed. Periodic domain-doped MgO ... PPLN was pumped by a 1.065μm single-frequency pulsed fiber laser, and the signal was suppressed by using a reflective Bragg grating grating. The spectrum width of idler spectrum was changed from free-oscillation 38nm narrow to 0.42nm, and the oscillation threshold is reduced to 6.7 W, resulting in high conversion efficiency of the mid-infrared laser output. By adjusting the angle and temperature of the volume grating, the tunable output of idler light at 230 GHz was achieved. When the idler output power was 2.5 W, the horizontal and vertical beam quality factors were 1.8 and 1.9, respectively.
其他文献
全固态激光器被动锁模是产生超短脉冲的一种有效方法。在基于Nd~(3+)掺杂激光材料被动锁模产生超短脉冲的研究中,无序晶体成为研究的热点。结合相关工作,总结了Nd~(3+)掺杂无
采用动力学有限元分析软件ANSYS/LS-DYNA对316L不锈钢靶板在脉宽为纳秒量级的强激光诱导的冲击波作用下的变形速度进行了数值模拟,建立了适用于高压高应变率条件下的有限元模
反演算法是光散射颗粒测试技术中的关键问题之一,以Tikhonov正则化方法为代表的单参数正则化算法被广泛应用于激光粒度仪颗粒粒径分布函数(PSD)的反演计算中。该算法的缺点之