高层钢筋混凝土框架工程进入标准层施工后,各层结构雷同,怎样选用脚手工具,是全面完成任务的关键。根据我单位现有的施工条件,成功的采用了简单易行的悬挑脚手架。具体做法是:在楼板上预埋φ16钢筋环,然后,将[16槽钢插入环中,挑出1米长,上铺脚手板,立钢管,形成一座外脚手架,以供边柱梁支模、绑扎钢筋和浇灌混凝土用。见图1、2 。 After the high-rise reinforced concrete frame project enters the standard layer construction, the structure of each layer is the same. How to use the scaffolding tools is the key to fully fulfilling the task. According to the existing construction conditions of our company, we successfully adopted the easy-to-hang overhanging scaffolding. The specific approach is: pre-embedded φ16 steel reinforcement ring on the floor, and then insert the [16 channel steel into the ring, pick out 1 meter long, put up the scaffold board, and set up the steel pipe to form an external scaffold for the support of the side column beam. Reinforced and poured concrete. See Figure 1 and 2.