炭材料惰性涂层方法分析

来源 :新型炭材料 | 被引量 : 0次 | 上传用户:zhu0756
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
主要探讨炭材料惰性涂层和抗氧化涂层方法,分析了常用的包埋法、化学气相沉积、等离子喷涂法等三种方法的特点,着重分析了溶胶凝胶法、电化学、电子束喷涂等新方法在炭材料惰性涂层制备方面的可行性,认为涂层应该根据最终用途、使用环境、高的性能/价格比选择合适的涂层物质类型和方法.目前最有发展前途的是电子束喷涂涂层和CVD涂层.
其他文献
是环境工程学科的一门核心课程,不但概念公式繁多,而且还有大量的实物图例以及工艺流程图.本文以Macromedia Authorware 5.0为开发工具,开发了多媒体CAI课件.本文对课件的框
Data pre-deployment in the HDFS(Hadoop distributed file systems) is more complicated than that in traditional file systems. There are many key issues need to be
A direct-drive wave energy conversion system based on a three-phase permanent magnet tubular linear generator(PMTLG) and a heaving buoy is proposed to convert w
The target on the sea surface is complex and difficult to detect due to the interference of backscattered returns from the sea surface illuminated by the radar pulse. Detrended fluctuation analysis(DF
A space-borne synthetic aperture radar(SAR), a high frequency surface wave radar(HFSWR), and a ship automatic identification system(AIS) are the main remote sensors for vessel monitoring in a wide ran
探索了一种的炭/炭制备方法-快速化学液气相渗透致密(CLVD),沉积时间3h内可获得密度达1.74g/cm3的炭/炭材料.预制体为环形炭毡制件(160mm×80mm×10mm),以液态低分子有机物(C
PAN-ACF,H2S 的吸附转化过程涉及到ACF一个纳米孔体系改性的过程.在这个过程中,ACF的孔结构和微表面结构发生很大变化,而这种变化在350 ℃以下是不可逆的.孔结构的变化主要表
化学镀法制备Ni包覆ZrO2微粉,用分光光度法测定了镀液中的镍含量与时间的关系.得出NaF、表面活性剂对镀覆反应的影响,计算了镀覆反应的表现活化能.结果表明,镀覆后颗粒均由Ni和ZrO
为了降低氮化硅材料的成本,运用便宜的低纯度β-Si3N4粉末,通过无压烧结制备了氮化硅材料. 发现β-Si3N4粉末具有很好的烧结性能,得到的结构是由柱状颗粒和小球状颗粒形成的
The performance and integrity of a cassette cross-flow ultrafilter (Pellicon 2, Millipore) are examined with a suite of macromolecules of different molecular ma