论文部分内容阅读
常规冲洗工艺(common-processing process) 常规冲洗工艺是与高温快速冲洗工艺相对而言的。这种工艺冲洗温度低(18～22℃),时间长,出片速度慢,工作效率低。一般黑白胶片、X光片都采用这种工艺。目前国产胶片大部分品种因药膜熔点低,大都采用常规工艺冲洗。高温快速冲洗工艺(high-temp.qnick-processing process) 七十年代国外胶片采用新型坚膜剂和成色剂,使胶片质量及药膜熔点大为提高,冲洗加工温度提高到40℃以上,冲洗时间大为缩短,因而称为高温快速冲洗工艺。这种工艺,不仅冲洗时间短,而且药液、用水量都大为节
Conventional processing (common-processing process) Conventional processing is flush with the rapid flushing process at a relatively high temperature. This process flushing temperature is low (18 ~ 22 ℃), a long time, the film is slow, low efficiency. The general black and white film, X-ray film using this technology. Most of the current domestic film due to low melting point of the film, most of the use of conventional process flushing. High-temp. Qnick-processing process Seventies foreign film using a new hardener and coupler, the film quality and greatly increase the melting point of the film, processing temperature raised to 40 ℃ above, the processing time Greatly reduced, so called high-temperature rapid flushing process. This process, not only flushing time is short, but also the liquid medicine, water is large festival