超疏水HDPE/EPDM TPV表面的结构与性能

来源 :特种橡胶制品 | 被引量 : 0次 | 上传用户:gamebugs2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
采用金相砂纸打磨及盐酸(HC1)溶液刻蚀的铝箔为模板,以高密度聚乙烯(HDPE)/三元乙丙橡胶(EPDM)热塑性硫化胶(TPV)为原材料,通过模板法在TPV表面构建出超疏水表面,并对其表面结构与超疏水行为进行了研究.FE-SEM表明,经模压和模板剥离后的TPV表面产生了大量塑性形变,获得复杂的粗糙结构;润湿性测试显示,该TPV粗糙表面与水的接触角大于150°,且滚动角小于5°,根据Cassie模型计算出超疏水表面与水的接触界面中气-液界面的面积分数超过85%,表现出良好的超疏水性能.
其他文献
Raman probing of carbon electrode and electrolyte under dynamic conditions is performed here using different aqueous electrolytes to elucidate the fundamental events occurring in electrochemical superca-pacitor during charge-discharge processes.The areal
The approach of substituting electrochemically active with inactive elements has widely been used to improve the electrochemical performance of Li-rich intercalation cathode materials.This especially is true for Li-rich compounds where almost all of the L
As a substitute for synthetic ammonia under mild condition,electrocatalytic nitrogen reduction reaction(NRR)provides a hopeful approach for the development of ammonia.Nevertheless,the current develop-ment of NRR electrocatalysts is far from enough and a s
An experimental investigation of the crystallographic,Raman and transport properties of the Ce1-x(Nd0.74Tm0.26)xO2-x/2(0.1≤x≤0.6)doped ceria system was performed with the aim of setting out correlations between structural features and ionic conductivity o
Electrocatalytic nitrogen reduction reaction (NRR) at ambient conditions holds great promise for sustain-ably synthesizing ammonia (NH3), while developing highly-efficient, long-term stable, and inexpensive catalysts to activate the inert N≡ N bond is a k
The conventional Li–O2 battery (LOB) has hardly been considered as a next-generation flexible electronics thus far, since it is bulk, inflexible and limited by the absence of an adjustable cell configuration. Here, we present a flexible Li–O2 cell using N
Several challenging issues, such as the poor conductivity of sulfur, shuttle effects, large volume change of cathode, and the dendritic lithium in anode, have led to the low utilization of sulfur and hampered the commercialization of lithium–sulfur batter
For the applications of aqueous Li-ion hybrid capacitors and Na-ion hybrid capacitors, potassium ions are pre-inserted into MnO2 tunnel structure, the as-prepared K1.04Mn8O16 materials consist of nanoparticles and nanorods were prepared by facile high-tem
Development of active and non-noble metal-based catalyst for H2 production via NH3 decomposition is crucial for the implementation of NH3 as a H2 carrier. Co-based catalysts have received increasing at-tention because of its high intrinsic activity and mo
Lithium-ion batteries (LIBs) have greatly facilitated our daily lives since 1990s [1,2]. To meet the ever-increasing demand on energy density, Li metal is seen as the ultimate anode because of its ultra-high specific capacity (3860 mAh/g) and the lowest e