论文部分内容阅读
GJ966059 Hambach 露天矿使用的具有上部回转机构的斗轮挖掘机回收装置[刊,德]/OSSENKOPP∥Braunkohle.—1995,47(1/2).—4～6随着生产的扩大,自1984年起,研制了回收装置,并于1994年将其应用于大型机械。本文从以下几个方面作了简单介绍:(1)机械的总体构成;(2)各部分的结构(斗轮顶部、皮带输送途径、行走装置、回转与斗轮臂的上下结构);(3)辅助装置(回转角度限制机构、粉尘与噪声的控制);(4)通过限定运行范围防止冲突;(5)在现场的组装;(6)试车中的小改造。图3表1(郑秋霖)
GJ966059 Buckbach excavator recovery unit with upper swing mechanism used in Hambach open-pit mine [Published in Germany]/OSSENKOPP∥Braunkohle.—1995, 47(1/2).—4~6 With the expansion of production, since 1984 Since then, a recovery device has been developed and applied to large-scale machinery in 1994. This article gives a brief introduction from the following aspects: (1) the overall structure of the machine; (2) the structure of each part (the top of the bucket wheel, the belt conveyance route, the traveling device, the upper and lower structure of the swing and bucket wheel arms); (3 ) Auxiliary devices (rotation angle limiting mechanism, control of dust and noise); (4) Prevention of collisions by limiting the operating range; (5) Assembly at the site; (6) Small modifications in the commissioning. Figure 3 Table 1 (Zheng Qiulin)