在机械修理过程中,会遇到按旧标准和非标准设计的T形槽的加工问题。这样,加工用的T形槽铣刀便需要自制。我们用废旧细齿锥柄立铣刀加工改制成为满足加工要求的T形槽铣刀。 如图示是我们用废旧的φ22mm细齿立铣刀改制的T形槽铣刀,它在加工中既快又省,效率高。 这里要注意的是:改制后的T形槽铣刀,切削刃应锋利,不应有崩刃、钝口和磨退火等缺陷。 In the mechanical repair process, will encounter the old standard and non-standard design T-slot processing problems. In this way, the processing of T-slot milling cutter needs to be made. We use discarded end mill sharpening shank milling processing system to meet the processing requirements of T-slot milling cutter. As shown in the figure, we use T-slot milling cutter, which is made of scrapped φ22mm fine-tooth end milling cutter, which is fast and efficient in processing and high in efficiency. Here to note that: T-slot cutter after the restructuring, the cutting edge should be sharp, there should be no chipping edge, blunt mouth and grinding annealing and other defects.