论文部分内容阅读
小型多用收割机,不仅可收割小麦、水稻、豆类等作物,还可进行植保、插秧等作业,适合各地农村使用。1.使用前,机手应对机具进行全面技术保养和检查。检查切割器刀片间隙是否符合要求,动刀和定刀的刃口是否锋利。检查易松动的紧固件和连接件,调节上、下输送拨齿平皮带和三角皮带的松紧度。2.各润滑点按规定加注润滑油。每隔2小时对连杆小端、压刃器和八角轮等处应加注机油;主传动箱、连杆大端和各处滚动轴承等,应在检修时加足润滑脂,在使用中一般不再加润滑油。3.按照具体作业地区的作物情况,对机具进行初步的作业性能调节。在试运转前,先用手摇动发动机
Small multi-purpose harvester, not only harvest wheat, rice, beans and other crops, but also for plant protection, transplanting and other operations, suitable for all rural areas to use. 1. Before use, the machineman should conduct a comprehensive technical maintenance and inspection of the equipment. Check the cutter blade clearance is in line with the requirements of the knife and fixed blade edge is sharp. Check easily loose fasteners and connectors, adjust the upper and lower conveyor dial flat belt and V-belt tightness. 2 lubrication points according to the provisions of filling oil. Every 2 hours on the connecting rod small end, blade and octagonal wheel and other places should be filled with oil; the main gearbox, connecting rod big ends and rolling bearings everywhere, etc., should be added in the maintenance of grease, in use in general No more lubricating oil. 3. In accordance with the specific operation of crop conditions, the initial operation of the machine performance regulation. Before commissioning, shake the engine by hand