论文部分内容阅读
本文通过大量试验找出了钛合金攻丝难的主要原因在于摩擦扭矩大及切削温度高。而修正齿丝锥则大大降低了扭矩和切削温度(达70%左右),是钛合金攻丝较为理想的工具。
This article through a large number of tests found that the main reason for the difficult titanium tapping lies in the friction torque and cutting temperature. The correction tooth taper greatly reduces the torque and cutting temperature (up to 70%), titanium tapping is the ideal tool.