论文部分内容阅读
该机结构简单,操作方便,不必停车退刀,大大提高了效率,减轻了劳动强度,深受操作者欢迎。一、结构及其工作原理(见传动示意图) 整个机架由角铁电焊而成,坚固轻巧,并能根据场地随时移动。该机在同一工作台上装有两部攻丝机。因此,同时操作互不影响。单机主要结构是由电动机24,带动锥形轮25旋转。主轴23上端有一对锥形盘1、2
The machine has the advantages of simple structure, convenient operation, no need to stop and retract, greatly improving the efficiency and reducing labor intensity, which are very popular with operators. First, the structure and working principle (see the transmission diagram) The entire rack welded by the angle iron, rugged and lightweight, and can move at any time according to the site. The machine is equipped with two tapping machines on the same table. Therefore, simultaneous operation does not affect each other. The main structure of the single machine is driven by the motor 24, which drives the conical wheel 25 to rotate. A pair of conical disks 1, 2 are provided on the upper end of the main shaft 23