铅志铸造机是由机架、铅志模部分、铅志脱模机构和余料回收机构等组成。其构造示意图见下页图1。一、构造 1.机架部分:机架比较简单,可以用角铁,也可以木制。我们为了节省钢材,机架的主要部分用方木制成,其上部用角铁弯制,再用螺丝与木架铰接。机架高1.1米,宽0.35米。2.铅志模部分:由铅志模(25)、铅志模芯(19)及进退铅志模拨爪(30)、(31)等 Lead casting machine is made by the machine frame, the lead part of the lead, lead-off mold release mechanism and more than expected composition. The structure diagram is shown in the following figure 1. First, the structure 1. Rack part: rack is relatively simple, you can use angle iron, you can also wooden. In order to save the steel, we made the main part of the frame made of square wood, the upper part was made of angle iron, then the screws were hinged with the wooden frame. The rack is 1.1 meters high and 0.35 meters wide. 2. lead part of the model: lead model (25), the lead lead mold core (19) and advance lead lead mover (30), (31), etc.