论文部分内容阅读
In this paper a numerical simulation of a planar DC magnetron discharge is performed with the Particle-inCell/Monte Carlo Collision (PIC/MCC) method.The magnetic field used in the simulation is calculated with finite element method according to experimental configuration.The simulation is carried out under the condition of gas pressure of 0.665 Pa and voltage magnitude of 400V.Typical results such as the potential distribution,charged particle densities,the discharge current density and ion flux onto the target are calculated.The erosion profile from the simulation is compared with the experimental data.The maximum erosion position corresponds to the place where the magnetic field lines are parallel to the target surface.
In this paper a numerical simulation of a planar DC magnetron discharge is performed with the Particle-in Cell / Monte Carlo Collision (PIC / MCC) method. The magnetic field used in the simulation is calculated with finite element method according to experimental configuration. The simulation is carried out under the condition of gas pressure of 0.665 Pa and the voltage magnitude of 400 V. Typical results such as the potential distribution, charged particle densities, the discharge current density and ion flux onto the target are. The erosion profile from the simulation is compared with the experimental data. The maximum erosion position corresponds to the place where the magnetic field lines are parallel to the target surface.