论文部分内容阅读
六方棒料去毛刺简易工具如右图所示,该工具安装在多轴自动车床的横向刀架上。在基体4上装有销轴3,滑枕2由弹簧5顶住,弹簧的弹力由螺钉6调整。切削刀具1通过销轴7安装在滑枕上。当六方棒料转动时,刀具同时作摆动和直线往复运动,切削刃就能去除棒料棱边上的毛刺。H为车床中心高。该装置在1 A240—6型六轴自动车床上进行了试验。车床转速n=625r/min。六方棒料的尺寸S分别为14、17、19和22mm。试验确定两切削刃之间的距
Six-bar bar deburring simple tools as shown on the right, the tool is mounted on the multi-axis automatic lathe horizontal turret. A pin 3 is mounted on the base 4, the ram 2 is supported by a spring 5, and the spring force of the spring is adjusted by a screw 6. The cutting tool 1 is mounted on the ram by the pin 7. When the six-party bar rotation, the tool simultaneously swinging and linear reciprocating motion, the cutting edge can remove the bar edge burr. H is the center of the lathe. The device was tested on a A240-6 six-axis automatic lathe. Lathe speed n = 625r / min. The dimensions S of the hexagonal bars are 14, 17, 19 and 22 mm, respectively. Test to determine the distance between the two cutting edges