论文部分内容阅读
在乡间道路上,在城镇公路上,我们常常看到这样一种情况:一台带挂车的小四轮拖拉机转弯或通过交叉路口时,驾驶员既要驾驶车辆,又要伸手示意,一副手忙脚乱的样子。遇到情况,便茫然不知所措,往往在此时易造成交通事故。可见,小四轮拖拉机挂车安装灯光信号装置已到了势在必行的时候了。1.交流转向刹车信号灯简单改装法利用原交流发电机加装挂车信号灯。功能是:刹车时红灯亮;转向时前后均有灯光指示,后转向为黄色灯罩,与交通部门要求相符合,具体改装方法如下。(1)由于原后大灯已经不用,故将此路输出改为刹车灯的电源。(2)左右转向灯分为两路,每路包括两个指示灯,
On the country roads, on the town roads, we often see the situation where a small four-wheel tractor with a trailer turns or passes through an intersection, the driver not only driving a vehicle, but also reaching out for hands and feet Looks like. Encounter the situation, they are overwhelmed, often easy to cause traffic accidents at this time. Visible, small four-wheel tractor trailer installation of light signaling device has come to an imperative. 1. AC steering brake lights Simple conversion method using the original alternator trailer lights installed. The function is: the red light when the brake is on; when the steering wheel has the light indicator, the steering wheel is the yellow shade, which is consistent with the requirements of the traffic department. The specific modification methods are as follows. (1) Since the original headlamps have no need, so this road output to the brake light power. (2) turn left and right lights are divided into two, each including two lights,