论文部分内容阅读
硬盘是密封的,故障率低,但操作不当,使用环境差或机器搬运途中受到强烈振动,都可以引起硬盘系统出故障,一般常见的有以下几种:(1)系统不能从硬盘启动,这时显示器会给出下列信息:Non-system disk or disk eorror(非系统盘或磁盘错误)REPLACE ＆ STRIKE ANY KEY WHEN READY(换上系统盘打任意键)(2)操作系统不能识别硬盘等,当系统一旦不能从硬盘启动时.可以把操作系统盘插入A驱动器,从软盘启动,当想要进入硬盘C时会显示出如下信息:INVAID DRIVE SPECIFIATION(无效的驱动器定义符)
Hard disk is sealed, the failure rate is low, but improper operation, poor use environment or the machine is subjected to strong vibration on the way, can cause hard disk system failure, the common are the following: (1) the system can not start from the hard disk, which When the display will give the following information: Non-system disk or disk eorror REPLACE & STRIKE ANY KEY WHEN READY (put any keys on the system tray) (2) The operating system does not recognize the hard disk, etc. When Once the system can not boot from the hard disk, you can insert the operating system disk into the A drive and boot from the floppy disk. When you want to enter the hard disk C, the following message will appear: INVAID DRIVE SPECIFIATION (INVALID DRIVE SPECIFICATION)