论文部分内容阅读
故障现象开机接上透析液,电导度低报警,显示器状态画面上电导度无数值,温度显示382℃,余者正常。故障排除发生上述故障的原因可能有:(1)浓缩液未被吸入浓缩液导管;(2)连接头有脏物或盐结晶堆积;(3)浓缩液导管与浓缩液容器未接好;(4)浓缩液配制错...
Symptoms When the dialyze solution is turned on, the conductivity is low, and there is no value on the conductivity state of the monitor status screen. The temperature shows 382°C. The rest is normal. Troubleshooting The above failures may be caused by: (1) the concentrated liquid is not inhaled into the concentrate conduit; (2) the connector has dirt or salt crystals accumulated; (3) the concentrate conduit and the concentrate container are not connected; ( 4) Concentrate preparation error...