高交换容量苯乙烯大孔强碱Ⅰ型阴离子交换树脂的合成

来源 :离子交换与吸附 | 被引量 : 0次 | 上传用户:vera17
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本工作合成的高交换容量苯乙烯大孔强碱1型阴离子交换树脂80A,理化性能接近于Amberlite IRA900C的水平。80A的重量交换量为4.0~4.4meq/g(干树脂),比表面积为40~50m~2/g,平均孔径为90~100。80A的中间体,是苯乙烯—二乙烯苯共聚物(白球)及其氯甲基化产物(氯球)。白球交联度为6~10,以汽油、液体石腊为混合致孔剂。氯甲基化反应,采用无水三氯化铝为催化剂,反应温度35~40℃,反应时间约8小时,氯球的氯含量高达20~23%。 This work synthesis of high exchange capacity styrene macroporous strong base type 1 anion exchange resin 80A, physical and chemical properties close to the level of Amberlite IRA900C. 80A has an exchange weight of 4.0 to 4.4 meq / g (dry resin), an intermediate having a specific surface area of ​​40 to 50 m 2 / g and an average pore diameter of 90 to 100.80 A, and is a styrene-divinylbenzene copolymer White ball) and its chloromethylation product (chlorine ball). White cross-linked degree of 6 to 10, with gasoline, liquid paraffin as a mixed porogen. Chloromethylation reaction, using anhydrous aluminum chloride as a catalyst, the reaction temperature is 35 ~ 40 ℃, the reaction time is about 8 hours, chlorine content of chlorine ball as high as 20 to 23%.
其他文献