武钢冷轧厂双机架把连续冷轧后厚度为0.3～0.5mm的薄板,经退火后再度进行冷轧。轧制时,材料的变形抗力是决定轧机扭矩和负荷的主要因素。本文阐述了二次冷轧时工艺制度、实测的材料变形抗力、轧制功率。通过对轧制功率的解析,表明双机架轧机的负荷分配原则以及最大变形量。 WISCO cold rolling mill double-rack cold rolled continuously after the thickness of 0.3 ~ 0.5mm sheet, annealed again after the cold-rolled. Rolling, the material deformation resistance is to determine the rolling mill torque and load of the main factors. This article describes the process of secondary cold rolling system, the measured material deformation resistance, rolling power. Through the analysis of the rolling power, the principle of load distribution and the maximum deformation of the double-stand rolling mill are shown.