低能见度水平下行人交通事故严重程度及异质性分析

来源 :交通信息与安全 | 被引量 : 0次 | 上传用户:green_wong
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
为探究在低能见度水平下影响行人事故伤害严重程度的因素,并分析可能存在的异质性.以某市6405起行人-机动车交通事故为研究对象,分别研究高、低能见度水平下机动车-行人事故中行人伤害严重程度影响因素,建立均值异质性的随机参数Logit模型并通过弹性分析定量分析显著变量对行人受伤情况的影响程度.结果表明,高、低能见度下影响行人伤害严重程度的因素存在明显差异.①低能见度情况下男性驾驶员、高龄行人、卡车、沥青路面、凌晨、较暗的照明条件等因素会增加行人伤害严重程度.②低能见度情况下卡车和凌晨这2个因素具有随机参数特征,分别使行人死亡的概率增加了4.39%和2.67%;此外,当事故涉及卡车和26~35岁行人这2个因素时会增大行人死亡的概率;而当夜间有路灯照明与凌晨这2个因素共同作用时行人死亡的可能性降低.③高能见度情况下未发现具有异质性的影响因素,但发现男性行人和摩托车等因素会增大事故严重程度;而驾驶员年龄、沥青路面、周末和地形等因素对事故严重程度并没有显著影响.
其他文献
This study explores a novel WNbMoTaV high-entropy thin film (HETF) in amorphous structure via pulsed laser deposi-tion system.The formation of amorphous structure of this high-entropy alloy is ascribed to the high cooling rate during the deposition proces
In the present study,we investigate the crystal structure of high-entropy alloys (HEAs) in the form of CoFe2NiMn0.3AlCux(x =0.25,0.50,0.75,and 1.00) and their mechanical and magnetic properties.The CoFe2NiMn0.3AlCux alloys are composed of a mixture of a b
The ageing hardening mechanism of a newly designed Fe-Cr-based Fe65Cr13Cu3(CoMnMoNiAlTi)19 medium-entropy stain-less alloy (ME-SA) with a simple bcc solid solution matrix was studied.This kind of ME-SA possessed a higher ageing hardness of approximately 5
In the present study,a series of AlCoCrxFeNi2.1 (x=0,0.25,0.5,0.75,1.0) eutectic high entropy alloys (EHEAs) have been designed and prepared.And the effect of Cr content on the microstructures and mechanical properties of the AlCoCrxFeNi2.1 alloys was sys
High-temperature structural metals remain in high demand for aerospace aircraft,gas turbine engines,and nuclear power plants.Refractory high-entropy alloys (RHEAs) with superior mechanical properties at elevated temperatures are promising candidates for h
为了解决船舶部分场景中仅靠变向避让效果差的问题,研究了多物标环境下符合避碰规则的船舶可变速自动避碰决策方法.基于船舶会遇四阶段理论和船舶领域模型量化船舶碰撞危险度,通过可变速MMG模型和模糊自适应PID航向控制方法推演船舶定、变速改向操纵过程.在此基础上,改进了基于操纵过程推演和速度障碍理论的动态可行操纵区间求解算法.以实船为仿真目标,进行了不同操纵方案下的对比实验和多物标场景下的仿真实验.将程序运行步长设置为1 s,结果表明:①预设他船位置(4 n mile,4 n mile),航向270,航速12 k
为解决传统船舶碰撞风险计算方法在繁忙受限水域的应用局限性问题,运用突变理论提出了1种考虑时空紧迫度的船舶碰撞风险计算方法.根据2船实际船舶领域叠加区域数值和2船同方位发生碰撞时的船舶领域叠加区域数值,建立船舶碰撞空间紧迫度计算模型;基于2船相对位置和相对速度的矢量关系,建立船舶碰撞时间紧迫度计算模型.在此基础上,运用突变理论建立了考虑时空紧迫度的船舶碰撞风险计算模型.通过模拟仿真实验,将该模型与最小会遇距离(DCPA)和最小会遇时间(TCPA)及基于时空距离的碰撞风险评估模型进行了对比分析.实验结果表明:
The composition is a significant issue for corrosion resistance of metallic materials.To reveal the correlation of corro-sion behavior between multiprinciple alloys and their constituents,a series of single-phase equiatomic alloys of CoCrNi,CoCrNiFe and C
CoCrNiCux (x=0.16,0.33,0.75,and 1) without macro-segregation medium-entropy alloys (MEAs) was prepared using laser directed energy deposition (LDED).The microstructure and mechanical properties of CoCrNiCux alloys with increas-ing Cu content were investig
对于高峰期发生的小型突发事件,应急车辆优先通行可能对路网造成强负外部性,同时为保证应急车辆优先通行而采取的信号协调策略可能导致路径选择不可靠.因此,提出1种基于双层规划模型的应急车辆优先通行策略,综合考虑应急车辆的时效性以及交通系统的运行效率.路径选择受路径长度等物理条件以及交通状态的影响,信号控制改变车道通行能力和上下游流量,进而改变路网状态.以车道组饱和度作为表征路网状态的参数,并以此联系路径选择与信号控制,进而构建应急车辆优先通行的双层规划模型.具体地,上层目标为应急车辆行程时间最短以保证应急车辆出