论文部分内容阅读
②前盖部件拆卸如图17所示，先拆去螺钉人把镜盖拔块1和镜盖连接块7拆下。旋去螺钉10，把电源总开关触片8分开。前盖长富2和前盖3是用双面不干胶带粘合的，只需用力撤出即可。旋去螺钉5，可拆下三角架连接座4。凡是和塑料零件热铆在一起的零件不可拆解，否则会造成报废。3．快
② Front Cover Removal As shown in Figure 17, remove the screw cap holder 1 and lens cap connector 7 from the screw holder first. Rotate the screw 10, the power switch contacts 8 separate. The front cover Chang Fu 2 and the front cover 3 are double-sided adhesive tape bonding, just forced withdrawal. Remove the tripod adapter 4 by unscrewing the screw 5. Parts that are riveted together with plastic parts can not be dismantled, otherwise they will be discarded. 3. fast