宝鸡消防机械厂在生产10公斤泡沫灭火机时,原来焊接筒身和筒底是:先将上口、底座和筒身点焊住,放于平台上,操作者焊完一段焊缝后用手转动一下工件再焊一段。这样,不但生产效率很低,而且焊缝质量不好。后来经学习上海经验后,开动脑筋,找窍门,利用废料,自己设计制造了如图所示的焊接台。 Baoji Fire Machinery Factory in the production of 10 kg foam fire extinguisher, the original welding barrel and the bottom is: first catchy, base and barrel spot welding live, put on the platform, the operator after welding a seam by hand Rotate the workpiece and then weld it. In this way, not only the production efficiency is low, but also the quality of the weld is not good. Later, after learning the experience of Shanghai, my brains, find tips, the use of waste, their own design and manufacture of the welding station as shown.