原来玻璃工厂熔化玻璃的池窑,采用的是高压外混武油喷嘴。这种喷嘴是在喷嘴出口处进行雾化的,由于在雾化阶段不能很好燃烧,因而火根发黑、温度低,火焰喷射面积小、发软,为了正常熔化玻璃,就需要多喷油来提高温度,这就增加了耗油量。为了克服上述缺点,我们设计了一种高压内混扁 The original glass factory molten glass pool kiln, using a high pressure mixed with oil nozzle. This nozzle is atomized at the exit of the nozzle. Due to the poor combustion in the atomization stage, the root of the fire is black, the temperature is low, the area of ​​the flame jet is small and soft. In order to melt the glass normally, it is necessary to inject more oil To raise the temperature, which increases the fuel consumption. In order to overcome the above shortcomings, we designed a high-pressure internal mixing