论文部分内容阅读
本文在回顾唐山地震震害经验教训的基础上,参阅有关资料,明确指出:厂房与贴建的附属建筑物之间如果不设置抗震缝是导致震害的主要原因之一,因而必须处理好厂房与生活间的相互关系。本文作者以某厂七个车间与生活间之间由于未设置防震缝,在唐山地震中引起的震害所作的调查分析为例,从中总结出一些规律,并提出了今后抗震设计的几点意见。文中的主要观点是:1.防震缝的设置应视烈度、生活间位置而有所区别。厂房与侧面毗连生活间之间,一般应设防震缝分开;厂房与端部毗连生
In this paper, based on the review of the experience and lessons of the Tangshan earthquake damage, we refer to the relevant information, and clearly pointed out that if no earthquake-proof joint is installed between the factory building and the attached auxiliary building, it is one of the main causes of earthquake damage, so we must deal with the factory building. The relationship with life. The author of this article took seven workshops and a living room of a factory as an example of investigation and analysis of the earthquake damage caused by the Tangshan earthquake because of the absence of anti-seismic joints. Some laws were summed up, and several suggestions for future seismic design were put forward. . The main points in this article are: 1. The setting of shockproof joints should be differentiated according to the intensity and location of life. Seismic joints should be separated between the factory building and the side adjoining living room; plant and end connexion