论文部分内容阅读
一、大小盘互换及其问题我单位有多台486微机,都是小盘启动;几月前,我装XENIX系统时,因为我市所有银行的XENIX系统均是大盘引导,且都未作过小盘系统盘;我于是通过拆换软驱线来更换软驱,又因软驱上的跳线开关无说明书,试了几次未成功.于是改用HD—COPY的大小盘对拷,复制后,用小盘启动,出现XENIX提示符,紧接着显示几行后而死机.开始怀疑是加了密,可是大盘对拷无事;此时,无意间进入SETUP,便试着设A:1.44M为1.2M;再启动,成功进入XENIX系统.二、COMPAQ VGA彩显冒白烟后屏幕字符跳动的问题
First, the size of the disk exchange and its problems My unit has more than 486 micro-computer, are small start; a few months ago, I installed XENIX system, because all banks in our city XENIX system are the broader market to guide, and did not make Over small disk system disk; then I replaced the floppy drive by replacing the floppy drive, but also because of the jumper switch on the floppy drive without instructions, tried unsuccessfully several times. So switch to the HD-COPY size disk copy, copy, Start with a small disk, there XENIX prompt, followed by a few lines after the crashes. Began to suspect it was added a secret, but the tape copy no problem; this time, accidentally entered the SETUP, then try to set A: 1.44M 1.2M; re-start, successfully entered the XENIX system. Second, COMPAQ VGA color display white smoke after the screen character beating problem