过去我们曾考虑在 J23—40、Jc23—60压力机上安装附属装置,实现多工位生产。但在设计模具过程中,发现较大的压力重心偏移将对滑块和模具带来不利影响,同时对各组模具闭合高度的要求也较严格。后来我们自行设计制造了一台“阶段式六冲锤自动压力机”,为 In the past we had considered installing attachments on the J23-40, Jc23-60 presses to enable multi-station production. However, during the process of designing the mold, it was found that larger deviation of the center of gravity of the pressure would adversely affect the slider and the mold, and at the same time, the requirements for the closing height of the mold of each group are also stricter. Later, we designed and manufactured a “stage six-hammer automatic press”