论文部分内容阅读
一、前言七十年代以来,随着技术引进和技术改造的发展,大型尼曼蜗杆副也随成套设备被引进来。由于这种蜗杆副具有承载能力大、传动效率高、制造成本较低等优点,而被广泛采用。目前,仅在冶金企业近百流方坯生产线中,尼曼蜗杆副就占80％以上,而且还在不断增加。因此,主机配套的大型尼曼蜗杆副的国产化及备件的提供就成为急待解决的问题。我国是从1982年开始研究多头尼曼蜗杆副的(中心距a=160毫米,z=5),现已初步形成生产能力,产品达到了引进产品的水平。1984年又开始大型尼曼蜗杆副的研制工作,
I. Foreword Since the 1970s, with the development of technology introduction and technological transformation, the large-scale Nehman worm pair has also been introduced with complete sets of equipment. Because of this worm with load capacity, transmission efficiency, low manufacturing costs, etc., are widely used. At present, the Niemann worm pair accounts for more than 80% of the total output of the billet in metallurgical enterprises, and is still increasing. Therefore, the host supporting the large-scale Neiman worm screw and the provision of spare parts has become an urgent problem to be solved. Our country started to study the long Niemann worm pair from 1982 (the center distance is a = 160 mm, z = 5). Now the initial production capacity has been reached and the products have reached the level of imported products. In 1984 and began the development of large-scale Neman worm vice,