Numerical simulation of NOx formation in a cyclone-opposed coal-fired utility boiler

来源 :煤炭学报(英文版) | 被引量 : 0次 | 上传用户:mlgb7758521
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper, FLUENT software was used to simulate the burning process in a utility boiler. Chose the kinetics/diffusion-limited as combustion model, two-compet-ingrates as devolatjlization model, RNG k-εmodel as viscous model, and PDF model as combustion turbulent flow model. Numerical calculation of NOx formation in a 330 MW cyclone-opposed coal-fired utility boiler with 32 double air registers was done. The distribution characteristics of temperature, NOx and oxygen concentration in furnace were studied. They were symmetrically distributed in furnace. In the combustion area, temperature and NOx concentration are high, while oxygen concentration is low. Temperature and NOx concentration are declined gradually along with furnace height, while oxygen concentration is raised. The higher the temperature is and the greater the excess air coefficient is, the more NOx formation.
其他文献
The model of catastrophic destabilization of tunnel under rock slipping in fault zone based on catastrophic theory and the potential function of fault movement were presented. On the basis of the results above, through Taylor series expansion of the equat
A new multifunctional testing device for rock fragmentation was introduced, which can conduct many experiments such as single cutting under static load, crushing under impact load, thrusting under static load and cutting-impact test under the dynamic and
It is highly important to investigate relationship between coal characteristics and methane adsorption on coal in the fields of coalbed methane recovery. Based on data examination of coal quality indexes collected from the literatures, regression equation
This article was written according to the security information theory and the security cybernetics basic principle, for reducing the accident risk effectively and safeguarding the production safety in coal mine. First, each kind of risk characteristic has
The develop actuality and direction of FRP(fibre glass reinforced plastics) bolt in the world are analyzed. The new type structure of FRP bolt was designed. Trial data indicate that, all kinds of capability target of this FRP bolt all achieve and exceed t
In order to design a new technological process system to take the polymeric ferric aluminum silicate sulfate(PFASS) and to apply it in wastewater processing, the chemical composition analysis was carried on to the Fuxin gangue, adopted the orthogonal expe
The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems.Then the ADMFB, which was a multivariable, nonlinear and coupled strongly system,was decoupled int
Two Zn-based sorbents, L-991 and L-992 used for hot 9as desulfurization (HGD) were introduced. Zn/Ti ratio of the two sorbent was 1:1 and 2:3 resptively and a certain proportion of Cu and Mn metal oxide were added into L-992, which provided better perform
Summarized the four main sources of CO gas on the working face based oninvestigation and local observation: firstly, it analyzed the mechanism that CO gas wasproduced by spontaneous combustion and oxygenation of gob residual coal; next, it illus-trated th
According to the analysis of the mechanism of top coal caving, the caving condition was pointed out, and many factors of caving were also determined. Then the relationship between factors and caving was studied. Based on the above research, one effective