【摘 要】
：
A dual cell system was used to study the output power, output voltage, galvanic polarization of anode and cathode, and the relationship between the electric qua
【机 构】
：
School of Chemistry and Chemical Engineering,Hunan Metallurgic Professional Technical College,School
论文部分内容阅读
A dual cell system was used to study the output power, output voltage, galvanic polarization of anode and cathode, and the relationship between the electric quantity(Q) and some factors, such as the dissolved Fe2+ magnitude, the time in the electrogenerative simultaneous leaching with bacteria(BEGSL) and without bacteria(EGSL). A three-electrode system was adopted to study their individual self-corrosion current, which was smaller compared with the galvanic current. The results show that the output power and voltage in BEGSL are higher than those in EGSL. The accumulated sulfur on the surface of sulfides produced in BEGSL can be oxidized by A. ferrooxidans, and the ratio of biologic electric quantity reaches 51.50% in 72 h. The first stage both in EGSL and in BEGSL is the dissolution of pyrite on the surface to ferrous ion and sulfur element, which was oxidized by A. ferrooxidans in the further procedure.
其他文献
This study investigated the rheological properties of semi-solid metal. An analytical model of apparent viscosity was built up based on analysis of energy dissi
Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11 Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were fabricat
La2/3Sr1/3Mn1-xZnxO3 films (x=0.05, 0.1, 0.3, and 0.5) were prepared using magnetron sputtering method, and the effect of Zn doping on transport properties of t
Ti-23Nb-0.7Ta-2Zr-O (TNTZO, molar fraction, %) alloy is a newly developed multifunctional β-type titanium alloy. This alloy was reported to deform via a unique
The enhancement of chemical absorption of CO2 by K2CO3/H2O absorbents in the presence of activated carbon (AC) particles was investigated. The results show that
Microstructure consisting of ferrite, bainite and retained austenite can be obtained through intercritical annealing and isothermal treatment in bainite transfo
The effects of Sr addition on microstructures and tensile properties of the as-cast and hot-extruded AZ80 alloys were studied by OM, SEM, EDS, XRD, DSC and Inst
Composite materials having lamellar structure are known to have a good combination of high strength and ductility. They are widely used in the fields of automob
The magnetocaloric effect in alloys Gd(Al1-xCox)2 with x=0, 0.05, and 0.10 were investigated using X-ray diffraction (XRD) and magnetization measurements.It was
The deformation behaviour of a casting Mg-3.6%Er magnesium alloy after T6 treatment was studied in tensile tests from room temperature to 450 ℃ under different