【摘 要】
：
Kinetic process of oxidative leaching of chalcopyrite in chloride acid hydroxide medium under oxygen pressure and low temperature was investigated. The effect o
【机 构】
：
School of Environmental and Architectural Engineering,School of Mineral Engineering
论文部分内容阅读
Kinetic process of oxidative leaching of chalcopyrite in chloride acid hydroxide medium under oxygen pressure and low temperature was investigated. The effect on leaching rate of chalcopyrite caused by these factors such as ore granularity, vitriol concentration, sodium chloride concentration, oxygen pressure and temperature was discussed. The results show that the leaching rate of chalcopyrite increases with decreasing the ore granularity. At the early stage of oxidative reaction, the copper leaching rate increases with increasing the oxygen pressure and dosage of vitriol concentration, while oxygen pressure affects leaching less at the later stage. At low temperature, the earlier oxidative leaching process of chalcopyrite is controlled by chemical reactions while the later one by diffusion. The chalcopyrite oxidative leaching rate has close relation with ion concentration in the leaching solution. The higher ion concentration is propitious for chalcopyrite leaching.
其他文献
The properties and structure of electrodeposited RE (CeO2)-Ni-W-P-SiC composite coating were investigated. The results show that the hardness and electrodeposit
In order to improve the wear resistance of Ti-6Al-4V, different amounts of Si3N4 powder were added into the alloy powder and sintered at 1250℃. Porous titanium
NiOOH was prepared by one-step electrolysis of spherical Ni(OH)2 and the effects of electrolysis parameters were examined.The higly pure NiOOH was obtained afte
A first-principles plane-wave pseudopotential method based on the density functional theory was used to investigate the energetic and electronic structures of i
This paper presents the adaptive mesh finite element estimation method for analyzing 2D linear elastic fracture problems. The mesh is generated by the advancing
Employing carbonyl iron powder and Ethylene-Propylene-Diene Monomer (EPDM) as the absorbent and matrix, rubber radar absorbing materials (RAM) were prepared. Ef
(Nd0.01Y0.99)3Al5O12 nano-sized powders were synthesized by low temperature combustion (LCS), using Nd2O3, Y2O3, Al(NO3)3·9H2O, ammonia water and citric acid a
The thermal decomposition of potassium titanium hexacyanoferrate(Ⅱ) (KTiFC) loaded with cesium (referred to as Used Exchanget,or UE) was studied at different f
The thermodynamic data of pure Ag and Y were calculated. The phase constitution, composition of micro-region and microstructures of Ag-Y alloy after internal ox
Effects of the volume fraction and the size of crystallized alumina silicate short fibers as well as heat treatment processes on micro-yield strength(MYS) of Al