论文部分内容阅读
东德阿虚来本机床厂(Aschersleben)原来生产各种规格的单臂、端面磨削导轨磨床,一为工作台移动,最大磨削长度3.5米;一为立柱、磨头移动,最大磨削长度为2.5米至10米。SFBZ1600/4000龙门式周边磨削导轨磨床是该厂较新的产品。该导轨磨床共有五只磨头,横梁上有三只磨头,二只是周边磨头,一只是端面磨头,可以分别在水平方向移动。立柱上有二只端面磨头,修整器有二种,一是周边磨削修整器,另一种是端面磨削修整器。它们都是独立、完整的部件,本身带着传动的动力源。工作台宽度为1500毫米,可磨宽度为1250毫米、可磨长度最大达12米。一、工作台
Aschersleben originally produced a variety of single-arm, face grinding guide rail grinders, one for table movement, the maximum grinding length of 3.5 meters; one for the column, grinding head movement, the maximum grinding Length of 2.5 meters to 10 meters. SFBZ1600 / 4000 gantry type peripheral grinding rail grinding machine is a newer product of this factory. The rail grinder has a total of five grinding head, the beam has three grinding head, two grinding head is around, one is the end grinding head, you can move in the horizontal direction. There are two end face grinding head, there are two kinds of dressers, one is grinding around the dresser, and the other is the face grinding dresser. They are independent, complete components, with their own power transmission source. The working table width is 1500 mm, the grinding width is 1250 mm and the grinding length is up to 12 m. First, the workbench