将蝴蝶整形风干。在一块较硬的透明塑料薄膜上涂上一层薄的乳胶,然后将蝴蝶放在上面,再用毛笔在蝴蝶身上涂上一层乳胶。几个小时后,蝴蝶标本就牢牢地固定在塑料薄膜上,贴上标签。乳胶涂膜蝴蝶标本就制作成了。 Shaping the butterfly dry. Apply a thin layer of latex to a harder transparent plastic film, place the butterfly on it, and apply a brush to the body of the butterfly. A few hours later, the butterfly specimen was firmly attached to the plastic film and labeled. Latex painted butterfly specimens were produced.