手竿护竿线上的缠线板，一般都采用线绳捆绑或用橡皮筋固定在竿体上。这两种方法操作起来都比较费事，改用松紧带固定可以克服上述的不足。具体制作方法是：在缠线板中间靠一边的外侧，用锥子尖在火上烧红，烫上两个眼（相距10毫米），然后取110毫米长、18毫米宽的松紧带一条， Hand pole Wick stick on the line of the tang, generally tied with a rope or rubber band fixed on the pole body. These two methods are more complicated to operate, switch to the use of elastic band can overcome the above deficiencies. The specific production method is: in the middle of the winding board by the side of the outside, with the awn tip on the fire red, hot two eyes (10 mm apart), and then take 110 mm long, 18 mm wide elastic band,