In this study,a route for simultaneous mineralization of CO2 and production of titanium dioxide and ammonium alum,and microporous silicon dioxide from titanium-bearing blast furnace slag (TBBF slag) was proposed,which is comprised of (NH4)2SO4 roasting,acid leaching,ammonium alum crystallization,silicic acid flocculation and Ti hydrolysis.The effects of relevant process parameters were systematically investigated.The results showed that under the optimal roasting and leaching conditions about 85％ of titanium and 84.6％ of aluminum could be extracted while only 3O％ of silicon entered the leachate.84％ of Al3+ was crystallized from the leachate in the form of ammonium aluminum sulfate dodecahydrate with a purity up to 99.5 wt％.About 85％ of the soluble silicic acid was flocculated with the aid of secondary alcohol polyoxyethylene ether 9 (AEO-9) to yield a microporous SiO2 material (97.4 wt％) from the crystallized mother liquor.The Al-and Si-depleted solution was then hydrolyzed to generate a titanium dioxide (99.1 wt％) with uniform particle size distribution.It was figured out that approximately 146 kg TiO2 could be produced from 1000 kg of TBBF slag.Therefore,the improved process is a promising method for industrial application.