论文部分内容阅读
医用金属器械涂上油质复盖层虽能在某种银度內防止金属受外界因素(水蒸气、氧气)的作用而生绣,但如对涂料选择、調合比例及操作技术等不加注意,也很难达到預期效果。我单位过去仅用黄凡士林或者与固体石蜡混合后涂抹器械,由于凡士林及固体石蜡的水分未排除,調合此例不一,有时石蜡过多而形成脫壳,有时过少而粘手粘紙。据观察,采用这种涂油方法,
Although coated with an oil-based coating, medical devices can prevent the metal from being embroidered by external factors (water vapor and oxygen) within a certain degree of silveriness. However, if the selection of coating material, mixing ratio and operating technique are not taken into account , It is difficult to achieve the desired results. My unit in the past only yellow petrolatum or mixed with solid paraffin after the application of equipment, as petrolatum and solid paraffin water is not excluded, the blending of this example varies, and sometimes too much paraffin to form shelling, and sometimes too little sticky sticky paper. It is observed that using this oiling method,