Broadband parametric amplification in ultrafast fluorescence application

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:dlufey
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Broadband parametric amplification is applied for the femtosecond ultrafast fluorescence research. The time resolution depends on duration of pump pulse, which works both as pump source and gate. For spectrum application, a special phase-matching angle exists for broadband amplification correspondence to the pump wavelength. The broadband amplification range from 500 to 750 nm was found for 'beta'-barium borate (BBO) crystal, pumped at 400 nm. Large dye fluorescence amplification of 10^(7) is realized. The generation of cone emission is selected as reference for system tuning. It is supposed to be a new method for ultrafast study in fluorescence comparable to fluorescence up-conversion and optical Kerr gate techniques.
其他文献
受热效应、光学损伤与非线性效应等因素的限制,单纤的功率提高困难。因此通过光学元件将多束激光进行合束的光束合成技术应运而生。光谱合束方案具有结构简单,合束光束质量好等优点,逐渐成为了合束技术发展的主流。简要介绍了光纤激光光谱合束的几种常见合束方案,对比分析了几种合束技术的优缺点。对光谱合束中存在的光栅热畸变问题,从理论研究和实验研究两个方面进行了针对性的分析与讨论,并对光谱合束未来的发展趋势进行了展望。
期刊
Fiber-optic laser–ultrasound generation is being used in an increasing number of applications, including medical diagnosis, material characterization, and structural health monitoring. However, most currently used fiber-optic ultrasonic transducers allow
暗视场及相衬显微术的分辨率可达10~500(?),采用这两种技术可以十分清淅地观察到用引上法及温梯法生长的Nd:YAG晶体中的点缺陷集团,小尺寸位错环,蜷线位错,片状缺陷时精细结构.特别是观察到非缀饰刃位错及混台位错的图像.对非缀饰位错的观察已用化学腐浊,光双折射貌相术及X射线形貌术作了证明.
期刊
In order to improve the morphology of microchannels fabricated by femtosecond laser ablation, the thermal process was introduced into the post-treatment processing. It was found that the thermal process cannot only decrease the roughness but also the widt
In this paper, the Cerenkov radiation of light pulse in a microring and gratings is simulated and investigated. The system design consists of a two-defect grating incorporating a microring, connected with a uniform grating. In simulation, the continuous w
期刊
针对多介质拍摄时高阶畸变折射补偿法存在的误差大、局限性强等问题,提出一种基于粒子群标定的多介质定位算法。应用Matlab软件标定工具箱得到摄像机内、外参数,在此基础上,采用粒子群优化算法标定折射平面法向量和光心到折射平面的距离,然后应用光线追踪方法,给出了一种多介质条件下的目标精确定位算法。实验结果表明,当被测物处于直立与倾斜两种位置时,应用该算法得到的相对定位误差分别为0.70%和0.45%,而应用高阶畸变折射补偿法得到的相对定位误差分别为1.71%和8.96%。该算法的相对定位误差远远低于高阶畸变折射
巴特耳纪念硏究所生长一种光学质量良好的,作光受激发射用的红宝石。新方法是将含有微量氧化铬的氧化铝溶于氧化物或氟化物熔剂中。混合物加热使氧化物溶解;冷却时,红宝石即析出。可以用氧化铝晶体作晶种或使结晶开始。在这种新的熔剂法中,红宝石的结晶温度为1350°F,较现在商品生产新用的Verneuil法的结晶温度3500°F要低得多。
期刊
We report on the generation of a mid-infrared (mid-IR) frequency comb with a maximum average output power of 250 mW and tunability in the 2.7–4.0 μm region. The approach is based on a single-stage difference frequency generation (DFG) starting from a comp