论文部分内容阅读
在进行全光准稳态空间孤子的实验中,发现在相同光强条件下,利用不同波长的光作为信号光束,准稳态孤子存在的时间不相同.一般来说,波长较长的光束形成准稳态孤子的时间区间较长.特殊的,当波长大至一定程度时,将形成稳态的空间孤子,这完全不同于以往所观察到的准稳态孤子.
全光准稳态空间孤子对波长的依赖性
【摘 要】
：
在进行全光准稳态空间孤子的实验中,发现在相同光强条件下,利用不同波长的光作为信号光束,准稳态孤子存在的时间不相同.一般来说,波长较长的光束形成准稳态孤子的时间区间较
【机 构】
：
中山大学光子材料与技术国家重点实验室
【出 处】
：
物理学报
【发表日期】
：
2004年期
其他文献
Aim of this research is to minimize makespan in the flexible job shop environment by the use of genetic algorithms and scheduling rules.Software is developed us
Tensile testing results of spray cast Ni3Al-based superalloy indicated that the yield strength and tensile strength increase with the increasing of temperature
Transient liquid phase bonding of TiC particulate reinforced magnesium metal matrix composite (TiCp/
Microstructures and mechanical properties of transient liquid phase (TLP) bonded magnesium metal matrix composite (MMC) joints using copper interlayer have been
Based on a non-repudiation protocol NRPUM, which provides point-to-point non-repudiation services, this paper proposes a non-repudiation solution to secure emai
When applied to mobile computing systems, checkpoint protocols for distributed computing systems would face many new challenges, such as low wireless bandwidth,
Subcarrier and power allocation algorithm based on inter-cell interference mitigation for OFDMA syst
This article proposes a dynamic subcarrier and power allocation algorithm for multicell orthogonal frequency division multiple access (OFDMA) downlink system, b
On the basis of various firewall-penetrated technologies, a novel firewall-penetrated technology based on trusted host, which can realize the communication betw
研究了液相线铸造 A35 6铝合金在不同保温温度、不同保温时间下的组织形成规律。电子显微镜及图象分析仪分析表明 ,由于过冷和扩散的共同影响 ,A35 6铝合金液相线铸造最佳保
Effects of impingement and friction of swirling air stream on prefilming airblast atomization of non
Liquids to be broken up using a prefilming airblast atomizer are usually Newton liquids with relatively low viscosities. While in some industrial processes, suc