红外测温过程中怎样决定物体表面的黑度

来源 :能源技术 | 被引量 : 0次 | 上传用户:rilton
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
近来随着节能工作的进展,使用红外测温仪测量物体表面温度的情况越来越普遍起来了。但是在使用中往往对物体表面的黑度不大注意,无法正确决定这一参数,或者只是利用现成表格挑选一个近似值,因此常常引起一些不必要的误差。我们最近在使用东德产的红外测温仪时,根据其叙述的决定物体表面黑度的三种方法,觉得颇为简易实用,为此择要介绍如下供有关人员参考,以便提高红外测温的测量精度。 Recently, with the progress of energy-saving work, the use of infrared thermometers to measure the surface temperature of an object is more and more common. However, in practice, the surface of the object is often not paid enough attention to the blackness of the object, the parameter can not be correctly determined, or only an approximate value is selected by using the ready-made table, thus frequently causing unnecessary errors. We recently used the East German-made infrared thermometer, according to the description of the surface blackness of the three methods that are quite simple and practical, for which we have to choose to introduce the following for reference, in order to improve the infrared temperature measurement The measurement accuracy.
其他文献
The laser ablation technique was employed to prepare TiO2 nanoparticles by pulsed laser ablation of a titanium target immersed in the poly-(vinylpyrrolidone) so
<正> 继1982~1984年中国历史博物馆考古部、山西省考古所和垣曲县博物馆发掘山西省垣曲县古城东关遗址第Ⅰ—Ⅲ区之后,又于1985~1986年春季发掘了该遗址第Ⅳ发掘区(以下称东关Ⅳ区)。发掘位置选在此区的中部。这里处于浼西河西岸的二级阶地上,北距古城镇以北的小村北窑庄约210米,西距垣曲县第一中学操场120米,南距县第二医院80米,东距沇西河河床约230米,东南隔一条土路与第Ⅲ发掘区相邻。该区遗址总面积约56000平方米(图一)。发掘工作历时三个季度,共开探方及探
英语是一门基础课,在小学英语教学中,教师要优化课堂教学,提高课堂教学的质量。在小学英语课堂上,教师要做好导入工作;要巧妙设计教学情境并且把游戏教学法引入其中。 Engli
本文介绍通过试验作出的圆盘型X射线机曝光曲线表。根据工件厚度、焦距、选用的曝光时间可以迅速查出对应的千伏值。 This article describes the experimental disc-shaped
对C30和C50两个强度等级的混凝土进行不同水淬锰铁合金渣掺量试验,测试其强度变化趋势。通过对比,研究水淬锰铁合金渣混凝土和普通混凝土干缩率。结果表明,C30混凝土中水淬锰
我家后院有一片竹林,常年绿意盎然。阳光透过绿色的竹叶,将柔和的绿光撒入竹中,茂密的叶缝间,还有几只麻雀的身影若隐若现。也不知它们是何时来这安家落户的。鸟妈妈一身浅褐
Oxidation protective Si-Mo coatings were prepared by pack cementation on the surface of C/SiC coated carbon/carbon composites. The influences of Mo/Si mass rati
The traditional rolling process of Bi-2223/Ag wires with circular sections is an inhomogeneous process. For the purpose of achieving a uniform filaments distrib
S_(MDX)-1P型微区分析扫描电子显微镜具有好的分辩率和深的焦深,图像层次分明,主体感强,它除了能直接观察样品的表面形貌外,还可对样品中感兴趣的区域进行定性定量分析,所以
利用超声波由金属进入水中的反射和透射测定水位高低。同时得出了其有不同声速的金属厚度和荧光屏读数的变化规律。 The use of ultrasound from the metal into the water