【摘 要】
：
With the development of electric vehicles (EV),there is a huge demand for electric vehicle charging stations (EVCS).The utilization of renewable energy sources (RES) in EVCS can not only decrease the energy fluctuation by participating in peak-load reduct
【机 构】
：
College of Electrical and Information Engineering,Hunan University,Changsha 410082,China;Department
论文部分内容阅读
With the development of electric vehicles (EV),there is a huge demand for electric vehicle charging stations (EVCS).The utilization of renewable energy sources (RES) in EVCS can not only decrease the energy fluctuation by participating in peak-load reduction of the grid,but also reduce the pollution to the environment by cutting down the use of fossil fuels.In this paper,the optimal planning for grid-connected EVCS with RES is studied by considering EV load uncertainty.Nine scenarios are set based on a different characteristic of EV load to reveal the impact of EV load on net present cost (NPC) and to express the relationship between the optimal capacity and energy flow.Moreover,since electricity price also plays an important role in EVCS planning,an economic comparison between different cases with different electricity prices for peak-valley-flat period is carried out.The results reveal the economic benefits of applying RES in EVCS,and demonstrate that EV load with different characteristics would influence the capacity of each device (PV,battery,converter) in the EVCS optimal planning.
其他文献
河东煤田位于鄂尔多斯盆地东缘,是我国重要的大型煤田,近年来,已有多位学者在研究中发现河东煤田煤中铝、镓、锂等金属的富集矿点.在前人研究基础上,系统收集、梳理煤中金属方面的研究成果,结合保德地区的部分测试数据,阐述了煤(灰)中铝、镓、锂等金属元素在河东煤田的时空分布.河东煤田铝、镓、锂均表现为由南向北含量逐渐升高,总体来看保德地区及附近煤中铝、镓、锂含量均达到了最高;垂向上,河东煤田普遍呈现铝及镓、锂等微量元素含量山西组大于太原组,且在富集元素数量上也展现出山西组富集元素种类多于太原组;河东煤田的物源主要来
候选门级辐射类群(candidate phyla radiation,CPR)所包含的细菌种类约占已知细菌种类总数的1/4,然而该类细菌中只有解糖微小寄生菌(Saccharibacteria,又名TM7)的少数菌株被成功分离培养.研究发现,解糖微小寄生菌具有许多独特的生物学性状:该类细菌需要寄生在宿主细菌表面生长,这是一种全新的“细菌-细菌”寄生生存方式;细菌尺寸及基因组均较小,缺乏代谢相关基因,不能合成氨基酸和维生素;对宿主细菌表现出杀伤作用或保护其躲避免疫系统的攻击.此外,解糖微小寄生菌与牙周病等疾病
Atomic layer deposition (ALD) as a flexible surface-controlled fabrication technique has attracted widespread interest in numerous nanotechnology applications,which can obtain ultrathin or two-dimensional molybdenum disulfide (2D MoS2) films.The ALD techn
The safety of lithium-ion batteries under mechanical abuse has become one of the major obstacles affecting the development of electric vehicles.In this paper,the lithium-ion battery safety model under mechanical abuse conditions is proposed by the Back Pr
A segmented hyper-redundant manipulator can perform complicated operation tasks in a confined space due to its high flexibility and dexterity.However,the trajectory planning in a narrow space and obstacles environment is very challenging for the manipulat
Wearable pressure sensors have drawn significant attention because of their extensive applications in motion detection,tactile sensing,and health monitoring.However,the complex manufacturing process and high cost of active materials make low-cost,large-sc
This paper proposes a novel motion planning and tracking framework based on improved artificial potential fields (APFs) and a lane change strategy to enhance the performance of the active collision avoidance systems of autonomous vehicles on structured ro
The widely used kinesthetic demonstration method of dragging robotic manipulators cannot obtain reliable information for autonomous robot manipulation because an additional external force rather than pure contact force will be reflected on the force senso
Station-keeping (SK) is indispensable in actual geostationary (GEO) satellite missions.Due to the luni-solar gravity perturba-tions,the inclination of a GEO satellite suffers the issues of secular drift and long-period oscillation.Current north-south (NS)
A numerical simulation method of shield tunnel excavation is developed to capture the time-dependent deformation behaviour of surrounding soil.The simulation method consists of four parts:(i) an elastic-plastic-viscous constitutive model that can not only