滚式塑料烫印在国内是近一两年发展起来的塑料烫印技术,它是在采用耐热氟橡胶滚筒,把电化铝纸滚压于塑料件表面的特种加工工艺,能实现塑料金属化的目的,节省大量铝材,高提装饰工艺水平,塑料滚烫有两个显著特点:1.滚式塑料烫印以线烫形式代替面烫形式,改变了传统平面热压烫印方法。2.滚式烫印能解决平面烫印因空气不能完全排出造成气泡的缺陷。我们分析和吸取国外先进滚烫技术,结合国产烫印纸特性,设想了多种滚式烫印机方案,通过实验样机,经上百次试验,突破滚烫机和烫印技术关,试制成功一台能流水生产,性能比较完善大型滚式塑料烫印机,已用于实际生产,经一年多的实践,滚式烫印机性能稳定,成批生产。 Rolling plastic stamping in the country is developed nearly a year or two of the plastic stamping technology, which is in the use of heat-resistant fluorine rubber roller, the aluminum foil rolled plastic parts on the surface of the special processing technology, to achieve plastic metal The purpose of saving a lot of aluminum, high mention the level of decoration technology, plastic hot rolling has two notable features: 1. Rolling plastic hot stamping instead of the hot form instead of surface hot form, changing the traditional hot stamping method. 2. Rolling hot stamping can solve the problem of air bubbles due to the air can not be completely discharged. We analyze and absorb foreign advanced hot technology, combined with the characteristics of domestic hot stamping paper, envisaged a variety of rolling stamping machine program, through the experimental prototype, after hundreds of tests, breaking hot machine and stamping technology off, trial success of a To water production, performance and more perfect Large-scale rolling plastic stamping machine, has been used in actual production, after more than a year of practice, rolling stamping machine performance and stability, mass production.