【摘 要】
：
Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coa
【机 构】
：
School of Mechanical Engineering
论文部分内容阅读
Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coatings forming element. The phase composition of the diffusion layer obtained depends on the activity of the Al during the pack aluminization processing. In this work, the proportion of Al to special additive powder in the pack and the treatment temperature are adjusted to achieve the desired surface composition of aluminized layer. The aluminized 20 plain carbon steel and HK40 austenitic steel were investigated by optical microscopy (OM) , X-ray diffraction (XRD)and microsclerometer. The results showed that the desired FeAl, Fe3Al and NiAl were respectively formed on the 20 plain carbon steel and HK40 austenitic steel, and the aluminides FeAl3, Fe2Al5 or Ni2Al3, NiAl3 could be inhibited.
其他文献
为研究变压器合闸过电压的机理测试了220 kV牵引变电站主变空载合闸过程,波形及数据的综合分析显示系统过电压为高频振荡.ATP-EMTP模型的仿真结果表明,合闸相角、系统阻抗、
The heat treatment, including two steps, was proposed to obtain Fine Fully Lamellar (FFL) microstructure on TiAl containing minor Ni. The first step was in (α+
The valence electron structure (VES) in compound layer of steel plasma-nitrided at 560℃ with rare earth (RE)addition was calculated based on the empirical elec
A surface engineering approach for a novel pre-treatment of hard metal tool substrate for optimum adhesion of diamond coatings is presented. Firstly, an alkalin
亚波长光栅因光栅参量的不同而具有不同的衍射特性 ,通过对亚波长光栅参量的合理设计来实现消偏振窄带滤波是一种新的方法与途径。首先分析了基于共振异常的窄带滤波的物理机
Diffusion layers produced on carbon steel surface in vacuum titanizing process were investigated. Studies of layers thickness, their morphology, titanium, carbo
Coated tools are widely used in todays metal cutting industries and have significantly improved machining productivity through reducing operation costs and time
首先建立了混合有源滤波器无源网络的内部电磁干扰模型,根据三相电流和磁感应压降之间的矢量关系,推导出无源网络等效电抗和等效电阻的数学表达式,以及品质因数和谐振带宽受
Nanoindentation, scratch and wear tests based on an atomic force microscope (AFM) were carried out to study the reliability of diamond-like carbon (DLC) films,
In this paper, a perpendicular experiment was conducted by using 4 key process parameters, such as concentration of sodium tungstate, current density, PH value