在进口大排量摩托车点火系统中,电子点火器的正常工作大都需要一个稳定的直流电压。当整流稳压器、蓄电池、导线出现故障或系统绝缘受到破坏时,首先受到危害的就是电子点火器。由于多方面的原因,此类车型点火器的修配代用一直是个热门话题。 GS125点火器的工作过程与上述的点火形式基本相同。它的两组接插件中五个连接点的用途如图1所 In the import of large displacement motorcycle ignition system, the normal work of electronic ignition most need a stable DC voltage. When the rectifier regulator, battery, wire failure or damage to the system insulation, the first to be jeopardized is the electronic ignition. Due to many reasons, such models lighter fitting replacement has been a hot topic. GS125 igniter working process and the above ignition is basically the same form. Its two sets of connectors in the five connection point purposes shown in Figure 1