【摘 要】
：
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process,aiming at achieving good cavitation erosion resistance.The ranking according to the cavitation erosion resistance is NiTi plate
【机 构】
：
CAS Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese
论文部分内容阅读
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process,aiming at achieving good cavitation erosion resistance.The ranking according to the cavitation erosion resistance is NiTi plate ＞ NiTi-Ni-TIG cladding ＞ NiTi-TIG cladding ＞ SS.The better cavitation erosion resistance of NiTi-TIG and NiTi-Ni-TIG claddings than SS substrate is due to their higher micro-hardness and superelasticity.Furthermore,the existence of Ni interlayer can decrease the amount of brittle intermetallic compounds,such as Fe2Ti,and inhibit the crack generation,which results in the higher cavitation erosion resistance of NiTi-Ni-TIG compared with NiTi-TIG cladding.Thus,the cavitation erosion resistance of NiTi cladding prepared by TIG surfacing process can be improved by employing Ni interlayer.
其他文献
AlCoCrFeNi is one of the most widely studied alloy systems in the high-entropy alloy (HEA) area due to the interesting microstructure and mechanical properties.In this study,the A1CoCrFeNi alloy was prepared using spark plasma sintering (SPS) with pre-all
The corrosion behaviour of 316L and Alloy 625 was investigated using cyclic polarization,electrochemical impedance spectroscopy,X-ray photoelectron spectroscopy,Auger electron spectroscopy and induced coupled plasma-optical emission spectrometer.The resul
High-entropy alloys (HEAs) are a new class of materials with a potential engineering application,but how to obtain ultrafine or nano-sized crystal structures of HEAs has been a challenge.Here,we first presented an equiatomic CoCrFeNiCu HEA with excellent
A 444-type heat-resistant ferritic stainless steel containing 0.05 wt％ Ce (rare earth element) and 2 wt％ (Mo + W) was adopted as an experimental material to study the effect of finish rolling temperature on microstructure and texture evolution as well as
The kinetics of isothermal austenite (γ)-to-ferrite (α) transformation at various temperatures in Fe-2Mn and Fe-2Mn-0.5Mo (wt％) alloys is investigated via dilatometry experiments and phase-field modeling.It was interestingly found that Mo addition has a m
In order to improve the interface wettability as well as the interfacial bonding between graphene and copper matrix,in this work,graphene nanoplates modified with nickel nanoparticles (Ni-GNPs) were synthesized using a one-step method based on spray-dryin
Construction of suitable structural models in order to account for chemical short-range orders is the reason behind the difficult multi-scale computational simulation methods for solid solutions.Herein,using Ti-Mo alloys as representative,we used our clus
FeAlCuCrNiMo0.6Tix (x =0.2,0.6,0.8) high-entropy alloys were fabricated with flux-cored wire and surfaced on low-carbon steel by gas metal arc welding.The effect of Ti addition on the microstructures and properties of FeAlCuCrNiMo0.6Tix HEAs surfacing lay
Ti-Ta alloys have been widely studied for biomedical applications due to their high biocompatibility and corrosion resistance.In this work,nearly fully dense and in situ alloyed Ti-50 wt％ Ta samples were fabricated by the laser powder bed fusion (LPBF) of
The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction stir welding was investigated by using pure aluminum,pure copper and Cu-30Zn alloy as experiment materials.Tool “stop action” and rapi