Prediction of the effect on antihyperglycaemic action of sitagliptin by plasma active form glucagon-

来源 :World Journal of Diabetes | 被引量 : 0次 | 上传用户:mfdbuxing
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
AIM: To investigate whether active glucagon-like peptide-1(GLP-1) is a prediction Factor of Effect of sitagliptin on patients with type 2 diabetes mellitus(GLP-1 FEST:UMIN000010645). METHODS: Seventy-six patients with type 2 diabetes, who had insufficient glycemic control [Hemoglobin A1c(Hb A1c) ≥ 7%] in spite of treatment with metformin and/or sulfonylurea, were included in the investigation. Patients were divided into three groups by tertiles of fasting plasma active GLP-1 level, before the administration of 50 mg sitagliptin. RESULTS: At baseline, body mass index, serum UA, insulin and HOMA-IR were higher in the high active GLP-1 group than in the other two groups. The high active GLP-1 group did not show any decline of Hb A1c(7.6% ± 1.4% to 7.5% ± 1.5%), whereas the middle and low groups indicated significant decline of Hb A1c(7.4 ± 0.7 to 6.8 ± 0.6 and 7.4 ± 1.2 to 6.9 ± 1.3, respectively) during six months. Only the low and middle groups showed a significant increment of active GLP-1, C-peptide level, a decreased log and proinsulin/insulin ratio after administration. In logistic analysis, the low or middle group is a significantexplanatory variable for an Hb A1 c decrease of ≥ 0.5%, and its odds ratio is 4.5(1.40-17.6)(P = 0.01) against the high active GLP-1 group. This remains independent when adjusted for Hb A1 c level before administration, patients’ medical history, medications, insulin secretion and insulin resistance.CONCLUSION: Plasma fasting active GLP-1 is an independent predictive marker for the efficacy of dipeptidyl peptidase 4 inhibitor sitagliptin. AIM: To investigate whether active glucagon-like peptide-1 (GLP-1) is a prediction factor of Effect of sitagliptin on patients with type 2 diabetes mellitus (GLP-1 FEST: UMIN000010645). METHODS: Seventy-six patients with type 2 diabetes, who had insufficient glycemic control [Hemoglobin A1c (Hb A1c) ≥ 7%] in spite of treatment with metformin and / or sulfonylurea, were included in the investigation. Patients were divided into three groups by tertiles of fasting plasma active GLP-1 level, before the administration of 50 mg sitagliptin. RESULTS: At baseline, body mass index, serum UA, insulin and HOMA-IR were higher in the high active GLP-1 group than in the other two groups. The high active GLP- 1 The groups did not show any decline of Hb A1c (7.6 ± 1.4% to 7.5% ± 1.5%), whereas the middle and low groups indicated significant decline of Hb A1c (7.4 ± 0.7 to 6.8 ± 0.6 and 7.4 ± 1.2 to 6.9 ± 1.3, respectively) during six months. Only the low and middle groups showed a significant increment of Active GLP-1, C-peptide level, decreased log and proinsulin / insulin ratio after administration. In logistic analysis, the low or middle group is a significant shift for an Hb A1 c decrease of ≥ 0.5%, and its odds ratio is This remains independent when adjusted for Hb A1 c level prior administration, patients’ medical history, medications, insulin secretion and insulin resistance. CONCLUSION: Plasma fasting (P = 0.01) active GLP-1 is an independent predictive marker for the efficacy of dipeptidyl peptidase 4 inhibitor sitagliptin.
其他文献
当轴被腐蚀或侵蚀、轴箱由于微震磨损和擦伤而致松动、液压元件有划痕或刮痕、印刷电路蚀点金或铑的导电面磨掉时,有没有能够用金属把损坏的地方或尺寸不足的地方修补起来的
现在,苏联在建造单机容量大的涡轮发电机方面取得了巨大成就:已经长期使用了80万瓩的双极涡轮发电机,建造和试验了120万瓩的涡轮发电机,拟议进一步提高其单机容量。 Now th
本文在能量色散X射线荧光分析系统的效率刻度及散射修正的基础上,用基本参数法对多元合金进行无标样X射线荧光分沂。分析结果表明,对于主成分元素,分析误差约为2%,对于次成分
江西省作为京汕低谷中的最大省区,具有独特的地位。作者运用低谷理论,对江西走出低谷的几个问题进行探讨。指出:江西在我国东部属于落后地区,只要正视落后,抓住落后的“低谷
由氟化铝解聚多硅酸,使试样中的硅酸能全部与钼酸反应,生成硅钼杂多酸。用乙醇作稳定剂,以硅钼蓝-丁基罗丹明B测定硅,提高了方法的准确度和稳定性。二氧化硅0—30μg/100mL范
我厂机修车间自制的一台单臂、工件落地式导轨磨床使用至今已有六年。在此期间我们摸索到一些安装、调整以及使用方面的经验。现介绍于下:实践说明有三个关键因素会影响导轨
测定血液中异烟肼的浓度,是检查异烟肼片剂在生物体内生物利用度的一个重要课题。通常测定血清异烟肼浓度的方法有荧光光度法,分光光度法,比色法及微生物法,其中荧光光度法
他汀类药物是预防和改善动脉粥样硬化性心血管疾病的主要药物,其主要机制是通过降低血清胆固醇水平、抑制动脉粥样硬化。最新研究表明,他汀类药物具有显著的抗炎效应,尤其可
70年代初,正当联合国大会制定的“第一个发展十年”的援助计划以令人沮丧的结果告终,“第二个发展十年”的援助计划又因发达国家经济陷入“滞胀”而前景渺茫的时候,拥有巨额
1。改进设计和合理选材: 我们已经知道,工件的形状尺寸是影响产生淬火裂纹的重要因素。为了防止淬火时产生裂纹,设计工件的形状结构时,应在保证使用性能的前提下,力求形状尽