由于码头向深水发展,船型趋向大型化、复杂化,因此,就重力式码头前趾与船壳之间的净距取值问题引起重视,并作了调查,现就此问题提出一些看法。 《港口工程技术规范》第四篇第一册<重力式码头>第15条指出;“‘码头结构底部突出部分与船壳之间的净距不应小于0.3 Due to the development of the terminal to the deep water, the ship tends to be larger and more complicated. Therefore, attention has been paid to the issue of the value of the clear distance between the front toe of the wharf and the hull of the wharf, and some investigations have been made on this issue. Article 15 of “Technical Specifications for Port Engineering” Volume IV of the “Port of Gravity” states: "The clear distance between the protruding part of the bottom of the wharf structure and the hull shall not be less than 0.3