Indentation toughness of Mo5Si3—based alloys

来源 :中国有色金属学会会刊：英文版 | 被引量 : 0次 | 上传用户：loserlu

【摘要】

：

The indentation toughness of Mo5Si3 -based phases was studied with regard to different alloying elements, amount of alloying addition as well as the presence of

【作者】

：

E.Strom 张继冯荻

【机构】

：

ChalmersUniversityofTechnology,CentralIronandSteelResearchInstitute

【出处】

：

中国有色金属学会会刊：英文版

【发表日期】

：

2002年4期

【关键词】

：

Mo5Si3基合金压痕韧性自润滑材料 indentation toughness Mo_5Si_3 alloying

【基金项目】

：

国家自然科学基金

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

The indentation toughness of Mo5Si3 -based phases was studied with regard to different alloying elements, amount of alloying addition as well as the presence of secondary phases. Cr, Ti, Nb, Ni and Co were added as alloying elements. The results show that

其他文献

浅谈高温条件下猪场的管理措施

相对而言，高温热应激对养猪生产的危害要大于低温寒冷对养猪生产的影响，我国养猪业发达的大部分地区，每年的5～10月份，气温很高，持续时间长，母猪的高温季节生产问题尤为突出。而母猪

期刊

高温条件饲养管理养猪场养猪生产季节生产持续时间热应激养猪业

关于图的κ—因子的一个新结果

图G的一个κ－正则生成子图标为G的一个κ－因子。文章首先给出了一个图G有κ－因子的一个充分条件。即若G是简单图，ν是偶数且δ（G）≥ν／2＋（κ－2）（这是κ是整数且κ≥3），则G是κ－因子。从而推

期刊

κ-因子κ-因子分解Hamiltion图Hamiltion圈简单图k-factors k-factorable Hamilton graph H

养猪生产过程中的常发疫病及防控措施

当前,随生猪养殖规模的扩大,猪病威胁备受民众关注。由此,做好防病措施,增强养猪效益,是今后科学养殖的重点和关注点。对猪病的防控,首先我们要认识到常发种类,其次,树立管重

期刊

猪病防疫问题

Development and application of WGQ type micro-computer-based electromagnetic nondestructive testing

The WGQ type micro-computer-based electromagnetic nondestructive testing instrument for quality of metal material was developed on the principle of electromagne

期刊

硬度电磁非破坏性测试磁导电导率hardness electromagnetic nondestructive testing magnetic co

Basic properties of calcium phosphate cement containing different concentrations of citric acid solu

The properties of calcium phosphate cement consisting of α-tricalcium phosphate (α-TCP) and tetracalcium phosphate (TTCP) have been investigated by using a ce

期刊

羟基磷灰石压缩强度柠檬酸浓度α-TCP/TTCP粘合剂TCP/TTCP cement citric acid setting time comp

Anisotropic plastic deformation behavior of B2—ordered Fe1Al single crystals at room temperature

The tensile plastic deformation behavior of B2-ordered Fe3Al single crystals at room temperature was systematically investigated.The results show that the mecha

期刊

室温FE3AL金属间化合物塑性变形plastic deformation B2order Fe3Al single crystal

Novel PEG-based binder system and its debinding properties for MIM

Binder system is critical to the success of metal injection molding(MIM). A novel PEG-based binder for MIM was developed, which was made of high density polyeth

期刊

metalINJECTIONMOLDINGBINDERDEBINDINGmetal injection molding binder debind

Interfacial microstructure of 20% SO2/Al matrix composites reinforced with in situ formation ceramic

Al matrix composites reinforced with in situ ceramic phases by adding 20% SiO2 were fabricated by powder metallurgy process. The interfacial microstructure of t

期刊

晶界显微结构原位复合物复合强化陶瓷相晶粒强化铝混合物SO2/Alin situ composites interface microstruc

Effect of oxygen content on tensile strength of polymer-derived SiC fibers

Air-curing is usually applied to the polymer-derived SiC fibers and, as a result, oxygen is embedded to the material. An effective relationship between oxygen c

期刊

碳化硅光纤抗张强度机械性能氧含量聚合陶瓷SiC fiber oxygen content mechanical property polymer

动态层次组播路由

随着网络的发展，平面路由难于适用不断扩展的大规模网络。文章针对这一缺陷，提出一种分层路由结构。文章具体分析了层次网络结构和树构造过程，并结合层次网络结构特点提出了动态

期刊

层次组播路由动态hierarchical multicast routing dynamic

Indentation toughness of Mo5Si3—based alloys

与本文相关的学术论文