论文部分内容阅读
一、概述目前国内在机床的动作控制方面,较为普遍地采用继电器或各种类型集成元件组成的逻辑电路。当机床动作要求改变的时候,需要重新设计和装配。这就无法提高通用性、可靠性、缩短设计周期。近年来微型计算机在工农业等各个领域得到广泛的应用,若配上所需的接口,也可适用于机床控制。对于不同的机床配有足够接口的微型计算机,在改变动作要求时,不须改变硬件,只要改变软件编程即可实现不同的动作控制。我们无锡机床厂目前生产的WX—042喷油嘴磨床有中孔和座面两个工位和二台步
First, an overview of the current domestic machine tool motion control, the more common use of relays or various types of integrated components of the logic circuit. When the requirements of the machine tool change, you need to redesign and assembly. This can not improve the generality, reliability, shorten the design cycle. In recent years, microcomputers have been widely used in various fields, such as industry and agriculture. If coupled with the required interfaces, the microcomputer can also be applied to machine tool control. Microcomputers equipped with enough interfaces for different machine tools do not need to change the hardware when changing the motion requirements, and different motion control can be realized by changing software programming. We Wuxi Machine Tool Factory currently produces WX-042 nozzle grinder with hole and seat two stations and two steps