【摘 要】
:
Fabrication of microchannels on polymethylmethacrylate (PMMA) substrates using novel microfabrication methods is demonstrated. The image of microchannels is tra
【基金项目】
:
国家科技攻关项目;国家自然科学基金
论文部分内容阅读
Fabrication of microchannels on polymethylmethacrylate (PMMA) substrates using novel microfabrication methods is demonstrated. The image of microchannels is transferred from a silicon master possessing the inverse image of the microchannel to a PMMA plate by using hot embossing methods. The silicon master is electrostatically bonded to a Pyrex 7740 glass wafer, which improves the device yield from about 20 devices to hundreds of devices per master. Effects of embossing temperature, pressure and time on the accuracy of replication are systematically studied using the orthogonal factorial design. According to the suggested experimental model, the time for the whole embossing procedure is shorten from about 20 min to 6 min, and the accuracy of replication is 99.3%.The reproducibility of the hot embossing method is evaluated using 10 channels on different microfluidic devices, with variations of 1.4 % in depth and 1.8% in width.
其他文献
A new early-late synchronizer is proposed to improve tracking speed. The performance of the traditional early-late synchronizer is analyzed in detail, the resul
An algorithm of auto-searching weld line for welding mobile robot is presented.Auto-searching weld line is that the robot can automatically recognize a weld gro
目的 :考察乳痛宁颗粒剂中当归、川芎、香附子挥发油的最佳提取工艺和 β-环糊精最佳包合工艺。 方法 :用单因素分析考察最佳提取工艺 ,以收油率作为评价提取工艺的指标 ;用
The study of multipoint blank holder force(BHF) control is carried out for hydroforming a complicated shape motorcycle fuel tank. By finite element method (FEM)
Anomaly detection of privileged processes is one of the most important means to safeguard the host and system security. The key problem for improving detection
Wormhole attack is a serious threat against MANET (mobile ad hoc network) and its routing protocols.A new approach-tunnel key node identification (TKNI) was pro
This paper presents a model-driven 3G service creation approach based on model driven architecture technology.The focus of the paper is the methodology of desig
A technique for getting Euclidean reconstruction from two images of the same scene taken by a single moving camera, which undergoes a pure translation, is prese
Studies on the sintering, microstructure, mechanical properties and low temperature degradation behavior of yttria stabilized-tetragonal zirconia polycrystal (3
以水利水电工程专业学生为对象,研究水利人才主体对培养体系的认知,对进一步完善实践教学体系以及加强创新水利人才培养具有重要的作用。
Taking water conservancy and hyd