Testing Jitter on PLL Clocks Based on Analysis of Instantaneous Phase

来源 :Tsinghua Science and Technology | 被引量 : 0次 | 上传用户:calvin
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A novel method based on the analysis of instantaneous phase is proposed to extract the jitter on phase-locked loops output clock. The method utilizes the Hilbert transform to extend the real signal of PLLs output into an analytic signal, and the implementation of Hilbert transform is based on the Fourier transform windowed with Hamming window. Then, the jitter of clock is extracted from the instantaneous phase of analytic signal. The experimental results of simulations validate that the proposed method can effectively extract the jitter on PLL clock, and it has better performance by comparing the sinusoidal jitter extraction results with the other methods. A novel method based on the analysis of instantaneous phase is proposed to extract the jitter on phase-locked loops output clock. The method utilizes the Hilbert transform to extend the real signal of PLLs output into an analytic signal, and the implementation of Hilbert transform is based on the Fourier transform windowed with Hamming window. Then, the jitter of clock is extracted from the instantaneous phase of analytic signal. The experimental results of simulations validate that the proposed method can effectively extract the jitter on PLL clock, and it has better performance by comparing the sinusoidal jitter extraction results with the other methods.
其他文献
2009年4月起,一个新的组合名词出现在各类媒体上,并在不大不小的范围里引起关注,它的模样既熟悉又陌生,带有历史的严肃也染着现代的顽皮,它就是——’00后现实主义。八个来月
“限高、调低、扩中”是我国现阶段居民个人收入分配的基本路向。近年来,各级政府在限制高收入者的过高收入,尤其是调高低收入者的收入方面采取了许多有效措施,而对于扩大中
日本北海道政府工业开发实验室已开始研究用糠作原料生产SiC和Si_3N_4的制作工艺,研究目标是在1987年财政年度内建立生产工艺。燃烧后的糠内含有75%重量的SiO_2,为了 Japan
目前,在电子设备中广泛应用的插件式线路板(包含印制线路板),其与机箱的连接中普遍采用导向夹紧弹簧(简称导向夹簧)。导向夹簧的种类比较多,常用的有LL形、波形、S型、LS形
由天津市机床研究所承担的大功率电火花强化工艺研究于七月通过技术鉴定。与会代表对试验研究结果进行了审查,一致确认用硬质合金进行电火花强化的白层厚度已达0.3mm。效率2
一、北部湾经济区外语语言服务人才需求和规划2008年广西制定了《广西北部湾经济区2008—2015年人才发展规划》和《广西2008年人才开发目录--广西北部湾经济区人才开发目录》
为适应一些自动化设备(如某些加工中心)的需要,意大利SETTIMO公司开发了一种名叫B.F.B.的产品。它是一种具有自动测量功能的镗杆。其原理是利用主轴回转能实现刀具径向自动
日本日产汽车厂以冷锻代替热锻来制造滑动接头的叉体。工件材料为1048钢。采用这种冷锻工艺,材料消耗降低了64%,机加工时间减少了20%,生产率为每分钟20件。冷锻前,棒料毛坯按
化学抛光又称化学光亮处理,是靠化学药剂的溶解作用,来得到光亮的表面,这种方法尤如化学浸蚀一样,只需将试样在化学抛光液中浸蚀一定时间,或用浸有化学抛光液的脱脂棉球,在
四、轨迹插补控制数控装置在加工工件时根据指令控制磨削出各种直线、凸圆或凹圆、甚至椭圆形状及其组合的表面,亦可由它们来逼近各类曲线(如渐开线、摆线等)。椭圆轨迹可通