【摘 要】
：
Semiconductor and laser single crystals are usually brittle and hard, which need to be ground to have satisfactory surface integrity and dimensional precision prior to their applications. Improvement of the surface integrity of a ground crystal can shorte
【出 处】
：
InternationalJournalofExtremeManufacturing
论文部分内容阅读
Semiconductor and laser single crystals are usually brittle and hard, which need to be ground to have satisfactory surface integrity and dimensional precision prior to their applications. Improvement of the surface integrity of a ground crystal can shorten the time of a subsequent polishing process, thus reducing the manufacturing cost. The development of cost-effective grinding technologies for those crystals requires an in-depth understanding of their deformation and removal mechanisms. As a result, a great deal of research efforts were directed towards studying this topic in the past two or three decades. In this review, we aimed to summarize the deformation and removal characteristics of representative semiconductor and laser single crystals in accordance with the scale of mechanical loading, especially at extremely small scales. Their removal mechanisms were critically examined based on the evidence obtained from highresolution TEM analyses. The relationships between machining conditions and removal behaviors were discussed to provide a guidance for further advancing of the grinding technologies for those crystals.
其他文献
罗彻斯特大学的一个研究组已获得至今最短的可调谐激光脉冲。据该大学激光能学实验室微微秒研究组负责人莫鲁(G. Mourou)说，亚微微秒激光脉冲的应用包括激光聚变系统的诊断以及时间分辨光谱学。
采用高温固相烧结法制备了Er3 /Eu3 共掺杂和Yb3 /Er3 /Eu3 共掺杂系列硼硅酸盐玻璃样品。在978 nm半导体激光器抽运下, 测量了样品的光致发光谱, 分析了上转换机制。结果表明：随着Er3 浓度的增加, Eu3 的595 nm光谱强度增强;Eu3 的692 nm光谱强度随Yb3 浓度增加而增强, 并明显强于595 nm光谱。Er3 /Eu3 、Yb3 /Eu3 之间的能量传递和合作上转换等机制导致Eu3 离子上转换发射。
用光镜和电镜观察激光照射后豚鼠皮肤的变化，发现真皮的胶原纤维肿胀，周期性横纹模糊不清；弹性纤维增粗、卷曲、断裂。上述变化可能是激光的热效应所致。
苏联研制出一种新的晶体，掺铒镥铝石榴石，用在激光工程上以获得3微米左右的波长。这种晶体是在亚美尼亚科学院物理研究所生长的。苏联报道说，这为制作运转于红外区现有诸波长上的一系列激光器开辟了诱人的前景。
采用化学溶液沉积法和快速退火工艺在石英玻璃衬底上成功地制备了掺镧钛酸铋(BLT)铁电薄膜。X射线衍射测量显示, 生长在石英玻璃衬底上的BLT薄膜结晶良好, BLT薄膜的透射光谱测量显示生长在石英玻璃衬底上BLT薄膜在近红外具有较高透过率。通过对BLT薄膜椭偏光谱测量分析研究, 得到了BLT薄膜在300 ～1000 nm光谱范围的折射率和消光系数谱; 采用632.8 nm He-Ne激光器, 通过电致双折射方法对生长在石英玻璃衬底上的BLT薄膜的电光性能进行测量, 发现了BLT薄膜电致双折射的变化Δn与所加
利用本文提出的分区积分方法,推导出了正支共焦非稳腔输出功率方程,因此方程对实验非稳腔的计算结果,与实验数据能较好地吻合。
超表面在柱矢量光束(CVB)产生方面具有效率高、器件精巧等优势,被广泛用于CVB产生及相关应用,但是该方法存在一个比较大的缺点:超表面的结构是固定的,因此生成的CVB的阶数是不可调的。为了解决该问题,在1550 nm波段实验证明了一种通过模式的加减操作来高效调控CVB偏振阶数的方法。通过将两块超表面级联在一起,实现了CVB偏振阶数的减法运算;在两块超表面之间插入一块半波片,通过反转CVB偏振阶数,实现了CVB偏振阶数的加法运算。最终实现了在-8~8范围内以2为步长的CVB偏振阶数调控操作,实验结果与Jon
With progress in fabrication technology, integrated photonics plays an increasingly important role in highspeed optical communications, from monolithic transmitters and receivers for advanced optical modulation formats to on-chip subsystems for optical si
用磁控溅射法制备了K9基片/非晶态InSb/ZnS-SiO2样品。利用椭圆偏振光谱仪对非晶态InSb薄膜的光学常数进行了测量，利用傅里叶变换红外光谱仪得到光学带隙为0.26 eV。采用改进的Z-扫描装置对405 nm波长的非线性吸收和非线性折射进行了测量。结果表明非晶态InSb薄膜表现出饱和吸收和自聚焦特性，有效非线性吸收系数为-3.73×10-2 m/W，非线性折射率为6.64×10-9 m2/W。根据非线性吸收系数，计算了非线性吸收截面的面积，与相关文献的报道非常接近。基于对非晶态InSb薄膜在405